Post by markdg on Jun 12, 2008 8:11:26 GMT -7
Do you have a hard time finding a 1/32 scale chassis that fits any wheel base body, lexan, resin, model kit or a slot car that has a broken chassis. This could be of interest.
After two years of development, trial and error and rental car abuse, this car is ready to go.
Affordable, durable, quality parts, infinitely upgradable and super performance in stock form.
YOU MUST TRY ONE.
1/32 Scale Chassis Exploded View- 100% quality parts.
Here you can see the design that sets it apart from others. The semi-rigid plastic chassis is molded thick as to distribute weight that maximizes handling ballance (27grams). The key point to the design is the motor pod has a mini-flex feature, a small amount of unretained movement on steel pins at four points that gives this chassis great forgiving and controllable handling.
Parts List:
Chassis Blank- uncut- $7.00each
Chassis- machined- $12.00each
Motor with 9t metal pinion- $9.00
Aluminim o-ring front wheels- $3.50pr.
Independent front axle- $2.00each
Rear rims and ground sponge tires- $7.50pr. Hardened steel axle- $1.50 each
Rear axle bushings- $1.50 pr.
27 tooth Parma crown gear- $3.29 each
Slick 7 guide flag with nut- $2.25each
Pick-up braid- $.75 pr.
Body mounting pins- 8pc. $1.00
TOP- 1/32 Scale Chassis- weighted by thickness to ballance the handling in non-magnetic form.
LEFT- 1/32 Scale Short Chassis- from 2 7/8 to 3 1/4 inch wheel base. Ready to Run (RTR) $40.00
RIGHT- 1/32 Scale Long Chassis- from 3 1/4 to 3 5/8 inch wheel base. Ready to Run (RTR) $40.00
Chassis is 2 7/16 wide but can be cut down to 1 5/8 inch wide minimum.
After two years of development, trial and error and rental car abuse, this car is ready to go.
Affordable, durable, quality parts, infinitely upgradable and super performance in stock form.
YOU MUST TRY ONE.
1/32 Scale Chassis Exploded View- 100% quality parts.
Here you can see the design that sets it apart from others. The semi-rigid plastic chassis is molded thick as to distribute weight that maximizes handling ballance (27grams). The key point to the design is the motor pod has a mini-flex feature, a small amount of unretained movement on steel pins at four points that gives this chassis great forgiving and controllable handling.
Parts List:
Chassis Blank- uncut- $7.00each
Chassis- machined- $12.00each
Motor with 9t metal pinion- $9.00
Aluminim o-ring front wheels- $3.50pr.
Independent front axle- $2.00each
Rear rims and ground sponge tires- $7.50pr. Hardened steel axle- $1.50 each
Rear axle bushings- $1.50 pr.
27 tooth Parma crown gear- $3.29 each
Slick 7 guide flag with nut- $2.25each
Pick-up braid- $.75 pr.
Body mounting pins- 8pc. $1.00
TOP- 1/32 Scale Chassis- weighted by thickness to ballance the handling in non-magnetic form.
LEFT- 1/32 Scale Short Chassis- from 2 7/8 to 3 1/4 inch wheel base. Ready to Run (RTR) $40.00
RIGHT- 1/32 Scale Long Chassis- from 3 1/4 to 3 5/8 inch wheel base. Ready to Run (RTR) $40.00
Chassis is 2 7/16 wide but can be cut down to 1 5/8 inch wide minimum.